Product Overview
GS-9600 - Standard Double Wing
Overview
GateSet Corporate Line GS-9600 Series Speed Gate Turnstiles are robust products functioning indoor or outdoor, provide pedestrian access control in areas requiring moderate level of security. Encoder and PLC controlled obstacle movement is provided by brushless motor, and enhanced with security features such as anti-tail-gating and anti-pass-back, with seven optical sensors embedded in the turnstile case, which in total ensures one of the highest reliability available in market and a remarkably long life even in case of intensive usages. GS-9600 Series Speed Gates are the perfect solution, where design, aesthetics and passage speed are important.
Technical Specifications
TREATMENT - OTHER PARTS
:
All other parts are coated against corrosion
CASE DIMENSIONS (mm)
:
300 x 1450 x 980 (GS-9300, GS-9600), 430 x 1450 x 980 (GS-9900, GS-9920, GS-9940)
OBSTACLE LENGTH (mm)
:
225 mm (Standard Wing), 400 mm (Disabled Wing)
PASSAGE WIDTH (mm)
:
550 mm (Standard Passage), 900 (Disabled Passage)
WING HEIGHT
:
1200 mm
OPERATING VOLTAGE
:
115-240 V AC / 24V DC - 50-60 Hz
POWER CONSUMPTION
:
150 W (max) for single wing, 300 W (max) for double wings
OPERATING TEMPERATURE
:
-20°C / + 70°C
ACCESS CONTROL
:
Highest end Omron PLC control for granting access. Easy integration with all kind of access control equipment, configured to receive free contact at standard
SENSOR CONTROL
:
7 point (pairs) IR sensor control for N/O mode, sequential (switching) passage feature for N/C mode. The system continuously monitors the status of the corridor and gives alarm in several cases
OCCUPANCY MONITORING
:
When a user occupies the lane without flushing a card, systems gives alarm after an adjustable time
PASSAGE TIME-OUT
:
In instances where the lane is not used when access is granted the system will give alarm after adjustable time-out duration is exceeded
ENCOUNTERING
:
When the lane is occupied from the opposite direction of the granted access, the system will give alarm
ANTI-TAIL-GATING
:
When an unauthorized access attempt is made right after a valid access, system will give alarm and block access right after the valid passage (alarm/block access configurations are adjustable)
POSITION DETECTION
:
Position of the obstacle wings are detected by inductive switches Green arrow indicates “Passage Open”, Red cross indicates “Passage Closed”
WARNING INDICATORS
:
Two separate warning indicators at front and rear sides of the gate. Green arrow indicates “Passage Open”, Red cross indicates “Passage Closed”
SIDE LED STRIPES
:
Passage indication with side LEDs. Green for passage free, Red for passage blocked, Blue for standby
OBSTACLE MOVEMENT
:
Motorized movement by 24 V DC - 30 W brushless motor coupled with 50:1 gearbox. Speed control with encoder.
SAFETY SENSOR
:
Middle safety IR sensor for preventing obstacle - user interference
DIRECTIONAL MODE
:
Unidirectional and Bidirectional operation features as “Only Entrance”, “Only Exit”, “Entrance and Exit”
CAPACITY
:
Handling more than 30 passengers per minute
OPERATION SAFETY
:
Electrical and mechanical safety for all component To avoid injuries, all corners and sides are rounded
ELECTRICAL FAILURES
:
The wings are adjustable to be opened easily by hand
EMERGENCY OPERATION
:
Wings automatically hide to ensure safe evacuation during emergency
INSTALLATION
:
Ease of installation with mounting plate
CERTIFICATION
:
ISO 9001:2008
WARRANTY
:
2 Years