GS-4600 Standard Double Wing

PEDESTRIAN ACCESS CONTROL » Speed Gate Turnstiles

Overview

GateSet Smart Line Smart Line GS-4000 Series Speed Gate Turnstiles requires minimal space with its intelligent design while providing advanced features such as PLC controlled movement provided by servo motor, 8 optical sensors for security features such as anti-tail-gating and anti-pass-back. Thanks to its elegant design and high reliability, GS-4000 Series is the perfect solution for areas where smart use of space and passage speed are equally important.

MATERIAL - MAIN BODY

1.2 mm 304 grade stainless steel, satin finishing

MATERIAL - TOP COVER

12 mm Plexiglas Layer for LED Stripes, Finished by 10 mm Tempered Safety Glass (Black Tainted)

MATERIAL - INNER CASE

Reinforced with 6 mm horizontal galvanized metal bars to increase strength

MATERIAL - OBSTACLE

12 mm thick tempered safety glass

SIDE COVERS

Optical sensors are covered with 3mm thick Plexiglas

TREATMENT - OTHER PARTS

All other parts are coated against corrosion

MAIN BODY DIMENSIONS (mm)

200 x 1400 x 1000 (Single Wing), 265 x 1400 x 1000 (Double Wing)

OBSTACLE LENGTH (mm)

250 mm (Standard Wing), 425 mm (Disabled Wing)

PASSAGE WIDTH (mm)

550 mm (Standard Passage), 900 (Disabled Passage)

WING HEIGHT

1200 mm to 1500 mm

OPERATING VOLTAGE

115-240 V AC - 50-60 Hz

POWER CONSUMPTION

400 W (max) for single wing, 800 W (max) for double wings

OPERATING TEMPERATURE

-20°C / + 70°C

ACCESS CONTROL

Highest end Omron PLC control for granting access. Easy integration with all kind of access control equipment, configured to receive free contact at standard

SENSOR CONTROL

8 point (pairs) IR sensor control for N/O mode, sequential (switching) passage feature for N/C mode. The system continuously monitors the status of the corridor and gives alarm in several cases

OCCUPANCY MONITORING

When a user occupies the lane without flushing a card, systems gives alarm after an adjustable time

PASSAGE TIME-OUT

In instances where the lane is not used when access is granted, the system will give alarm after adjustable time-out duration is exceeded

ENCOUNTERING

When the lane is occupied from the opposite direction of the granted access, the system will give alarm

ANTI-TAIL-GATING

When an unauthorized access attempt is made right after a valid access, system will give alarm and block access right after the valid passage (alarm/block access configurations are adjustable)

POSITION DETECTION

Position of the obstacle wings are continuously detected by servo motor

SIDE LED STRIPES

Passage indication with side LEDs. Green for passage free, Red for passage blocked, Blue for standby

OBSTACLE MOVEMENT

Motorized movement by 220 V AC - 400 W servo motor coupled with 50:1 gearbox

SAFETY SENSORs

Middle safety IR sensors for preventing obstacle - user interference

DIRECTIONAL MODE

Unidirectional and Bidirectional operation features as “Only Entrance”, “Only Exit”, “Entrance and Exit”

CAPACITY

Handling more than 30 passengers per minute

OPERATION SAFETY

Electrical and mechanical safety for all components. To avoid injuries, all corners and sides are rounded

ELECTRICAL FAILURES

The wings are rotated automatically to open position

EMERGENCY OPERATION

Wings automatically rotate to open position in order to ensure safe evacuation during emergency Position Sensor feedback is used to determine in which direction the wings will open

INSTALLATION

Ease of installation with compact design

CERTIFICATION

ISO 9001:2015

WARRANTY

2 Years